Replacement Double Glazing Window Handles
If a double-glazed window handle is damaged, it's important to get a replacement, ensuring safety and functionality.
uPVC handles are operated by a spindle that runs through the middle of the handle into the lock mechanism in the window frame.
The height of the step on a uPVC handle can be determined by examining the screw cover caps on the inside of the handle.
Tilt & Turn
In Europe tilt and turn windows have been an increasingly popular choice. However they are only getting more popular in the UK. These windows are a preferred choice for renovations and new constructions due to their sophisticated capabilities. They are simple to open and close, allowing light and ventilation into your home.
The locking points on the sash and the rubber seal that wraps throughout the frame makes them more airtight than other window types. Contrary to uPVC Casement Windows, they tilt and turn can be opened from both the top and bottom. This allows you to clean your windows from the outside while sitting in the convenience of your home.
It is important to consider the step height when replacing a tilt-and-turn window handle. This is the distance from the base of the handle up to where it is fixed to the frame of the window. This is important as your window won't be able to properly open if you don't get it right.
Generally speaking, the standard step height for an UPVC or aluminum tilt and turn window is 21mm. Make sure that the handle you select has the same height so that it will fit your window.
Another aspect to keep in mind when selecting the tilt and turn replacement window handle is the kind of operation it has. Some handles have an adjustable lever that can be turned down to lock, then up at 90 degrees to tilt and straight upwards to open. This is referred to as a "tilt before turn" (TBT) safe handle and you should always use this when children are about in your home.
A spindle is normally found on the handle of many tilt and turn windows. This spindle can be adjusted to different places, much like a door lock. The length of the spindle also varies. Some have a longer spindle and it is adjustable by using a screwdriver to move the shaft up or down. Some have a shorter shaft that can only be adjusted by loosening the small screw at base of the handle.
Casement
Casement windows are very popular for a variety reasons. It is simple to set up and offers great energy efficiency and noise reduction. There are a few common problems with these windows. Homeowners should be aware of them. For instance, if your window handle is broken, it can be difficult to open the window.
There are a few basic steps you can take to replace the handle of your window. Whether your casement window is new or old, you can follow these steps to ensure your home is safe and secure.
If your uPVC casement window has broken, it is important to fix it as quickly as possible. This will help keep your home safe and deter burglars. You can choose from a wide range of window handles, including Espag handles and cockspur handles. It is crucial to select a handle that fits your window. If you're having difficulty opening your window, it is likely that the spindle within the handle has worn away.
There are some important things to consider when replacing the handles on your uPVC window casement. This includes the size of the handle, the screw centres, and the spindle size. Also, you should consider the lock's design and colour. The kind of handle you choose will determine the locking mechanism of your window.
Today's uPVC windows use Espag handles. These handles are used to operate your uPVC window's espagnolette multipoint lock. They are available in various colors and lock or unlocking versions. They also come in left and right opening options.
Cockspur handles are still present on older uPVC windows, however they are not used anymore in new double glazed windows. These handles differ from their aluminum counterparts in that they have different heights for the steps. The version made of aluminium has a step height of 9mm in comparison to the standard 21mm handle is used.
Another option for replacing double glazed window handles is to use blade or spade handles. These handles are similar to cockspur handles, but they have a shorter spindle. They are typically used on older wooden frame double-glazed windows, but they could be seen on uPVC cottage windows.
Sash
If you have a traditional sash window, it could require replacement double-glazed sash window handles to fit it. This is because windows of this kind typically have a system that comprises the counterweight, sash cord, pulley, and rails that allow the sash to move upwards and downwards with ease. The sash's movement blocks moisture from getting into the frame, which can cause mould and wood rot. It also permits you to open the windows to let fresh air in.
You'll have to determine the spindle of your sash windows to determine the correct handle. This can be determined by looking at the back of the handle's base and measuring how far it goes into the frame. You will also need to take into consideration the window's hand, i.e. The handle can open either clockwise or counter-clockwise, depending on whether it is right-handed.
After you have chosen the appropriate sash handles for your window, it's time to determine if you require tilt latch. A tilt latch helps to keep the window in a upright position, and can be installed on single or double glazed windows. They're available in three types that include internal tilt latches, slide-in tilt latches and surface mounted tilt latches.
For additional security, you could have a sash lock fitted to your sash window. This will protect the window's opening and prevent it from being pushed open by burglars.
There are a variety of styles of sash handles that you can pick from. Espag handles are the most well-known for uPVC Windows. They are typically slim and round, with a locking mechanism however, you can also find cockspur handle and monkey tail handle styles. They are usually more appropriate for older windows and provide a more decorative appearance however, they can be found on modern casement windows too.
Vertical Sliding
While horizontal sliding windows are a popular choice for large window openings Vertical sliding windows are perfect for smaller areas. These windows are easy to clean and provide excellent ventilation. They are also more cost-effective because they don't need any maintenance. However, they are susceptible to damage if you accidentally drag them forcefully. This is why it's crucial to place these windows in an area that is safe of pets and children.
Vertical sliding windows can be opened by moving left or right within a single frame. They are typically operated by the spiral balance, which is made up of a strip of metal that extends from the other side of the window, and is then twisted into a coil. When the window is opened, the spiral's hidden end spins allowing the sash sash to be lowered or closed.
The most commonly used type of vertical sliding window is made of real timber, which gives your home a classic appearance. If you prefer a more modern style, PVC-U comes in a variety of colours and finishes to suit your preferences. Some manufacturers provide a woodgrain appearance to give a more authentic look.
Vertical sliding windows are much easier to open than double-hung windows in certain circumstances. They are also less susceptible to damage from moisture than wooden windows, which makes them an ideal choice for homes with seniors or children.
Certain homeowners add security features to their new sliding windows to help keep unwanted guests away from the home. The simplest way to do this is to wedge the lower sash into scrap wood. You can then tack the scrap wood to the frame to stop it from being completely open. Consider adding a sliding-bolt keyed lock to the frame if are looking for a more advanced option. This will give your family peace of mind knowing their windows are safe and easily accessible in an emergency.